{"id":8864,"date":"2026-09-08T02:06:35","date_gmt":"2026-09-08T02:06:35","guid":{"rendered":"https:\/\/zhaolumach.com\/?p=8864"},"modified":"2026-09-08T02:39:24","modified_gmt":"2026-09-08T02:39:24","slug":"mini-excavator-hydraulic-system-guide","status":"publish","type":"post","link":"https:\/\/zhaolumach.com\/pl\/mini-excavator-hydraulic-system-guide\/","title":{"rendered":"Mini Excavator Hydraulic System Guide: Flow, Pressure &#038; Auxiliary Hydraulics"},"content":{"rendered":"<div class=\"zl-blog-article\">\n<div class=\"zl-blog-intro\">\n<p>A mini excavator hydraulic system is often overlooked by buyers who focus on engine power, operating weight or digging depth. But the hydraulic system is what actually converts engine output into the controlled movements that allow the machine to dig, lift, swing, travel and operate powered attachments. Two machines with similar engine ratings can perform very differently depending on how their hydraulic systems are configured. Understanding the basics of flow, pressure and auxiliary hydraulics helps buyers ask better questions and avoid specifying a machine that cannot operate the attachments they need.<\/p>\n<p>If you are still comparing machine sizes, the <a href=\"https:\/\/zhaolumach.com\/pl\/mini-excavator-size-guide\/\">Przewodnik po rozmiarach minikoparek<\/a> is a useful starting point. For broader sourcing and supplier evaluation, refer to <a href=\"https:\/\/zhaolumach.com\/pl\/buy-mini-excavator-from-china\/\">How to Buy a Mini Excavator from China<\/a>. This guide focuses specifically on the hydraulic side of the specification.<\/p>\n<\/div>\n<div class=\"zl-blog-summary\">\n<h2>Quick Answer: What Should Buyers Know About a Mini Excavator Hydraulic System?<\/h2>\n<p>A mini excavator hydraulic system uses a pump, hydraulic oil, control valves, cylinders and motors to convert engine power into machine movement and attachment operation. The key specifications to check are hydraulic flow, operating pressure and auxiliary hydraulic compatibility when powered attachments will be used.<\/p>\n<p>Rather than asking only &#8220;does this machine have auxiliary hydraulics,&#8221; buyers should confirm the auxiliary flow, pressure, circuit type, coupler specification and return-line arrangement for the attachments they plan to run.<\/p>\n<\/div>\n<section class=\"zl-blog-section\">\n<h2>1. How Does a Mini Excavator Hydraulic System Work?<\/h2>\n<p>In simple terms, the hydraulic system transfers power from the engine to the working parts of the machine through hydraulic oil. The engine drives a hydraulic pump, which creates oil flow. Pressure develops as that flow encounters resistance in the hydraulic circuit, allowing cylinders and motors to move the boom, arm, bucket, swing system and tracks.<\/p>\n<p>The basic flow path can be summarized as follows:<\/p>\n<div class=\"zl-blog-process\">\n<ul>\n<li>Silnik<\/li>\n<li>Hydraulic pump<\/li>\n<li>Control valve<\/li>\n<li>Hydraulic cylinders \/ hydraulic motors<\/li>\n<li>Return circuit<\/li>\n<li>Hydraulic tank<\/li>\n<\/ul>\n<\/div>\n<p>Each movement the operator commands from the joystick or pedal changes the position of a control valve, directing hydraulic oil to the required cylinder or motor. After doing work in the circuit, the oil returns through the hydraulic system according to the machine&#8217;s circuit design.<\/p>\n<p>For an overseas buyer, the most important point is not the detailed internal engineering, but whether the hydraulic system can reliably support the intended work and any powered attachments.<\/p>\n<div class=\"zl-blog-image\">\n    <img src=\"https:\/\/zhaolumach.com\/wp-content\/uploads\/2026\/09\/mini-excavator-engine-compartment.webp\"\n         alt=\"Mini excavator hydraulic hoses and system components inside the engine compartment\"\n         loading=\"lazy\"\n         decoding=\"async\">\n<\/div>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>2. Main Components of a Mini Excavator Hydraulic System<\/h2>\n<p>Understanding a few key components helps buyers read specification sheets and compare supplier quotations more effectively.<\/p>\n<ul>\n<li><strong>Hydraulic pump<\/strong> \u2014 Driven by the engine, it creates hydraulic oil flow for the machine&#8217;s working circuits. System pressure develops as the flow encounters resistance during operation.<\/li>\n<li><strong>Hydraulic oil reservoir<\/strong> \u2014 Stores hydraulic oil and helps dissipate heat. Clean, correctly filled oil is essential for reliable operation.<\/li>\n<li><strong>Control valve<\/strong> \u2014 Directs pressurized oil to different circuits based on operator inputs.<\/li>\n<li><strong>Boom, arm and bucket cylinders<\/strong> \u2014 Convert hydraulic pressure into the linear movements of the front working equipment.<\/li>\n<li><strong>Swing motor<\/strong> \u2014 Rotates the upper structure.<\/li>\n<li><strong>Travel motors<\/strong> \u2014 Drive the tracks, either independently or through a combined circuit depending on the machine design.<\/li>\n<li><strong>Hydraulic hoses and fittings<\/strong> \u2014 Carry oil between the pump, valves, cylinders and motors. Hose routing and protection affect long-term reliability.<\/li>\n<li><strong>Filters<\/strong> \u2014 Remove contaminants from the oil. Contaminated oil is a common cause of hydraulic component wear and failure.<\/li>\n<li><strong>Auxiliary hydraulic circuit<\/strong> \u2014 Provides a dedicated flow path for powered attachments such as breakers, augers and grapples.<\/li>\n<\/ul>\n<p>Not every mini excavator includes the same auxiliary hydraulic configuration. Buyers should confirm whether the auxiliary circuit is standard, optional or unavailable for the model they are considering.<\/p>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>3. Hydraulic Flow vs Hydraulic Pressure<\/h2>\n<p>Hydraulic flow and hydraulic pressure are two different specifications, but buyers sometimes confuse them. Both are needed to evaluate whether a machine can operate a specific attachment or perform a particular type of work.<\/p>\n<p><strong>Hydraulic flow<\/strong> is the volume of hydraulic oil moving through a circuit, usually expressed in liters per minute (L\/min) or gallons per minute (GPM). Flow mainly affects how quickly a cylinder extends or how fast a hydraulic motor can turn. At a buyer level, higher flow often supports faster attachment operation, but the attachment must be designed for that flow range.<\/p>\n<p><strong>Hydraulic pressure<\/strong> is the force per unit area in the hydraulic circuit, usually expressed in bar, megapascals (MPa) or pounds per square inch (PSI). Pressure is related to the working force the system can generate. A breaker or other attachment has a rated pressure range, and the machine must be able to supply pressure within that range.<\/p>\n<div class=\"zl-blog-table-wrap\">\n<table class=\"zl-blog-table\">\n<thead>\n<tr>\n<th>Specyfikacja<\/th>\n<th>What It Describes<\/th>\n<th>Why Buyers Should Check It<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Przep\u0142yw hydrauliczny<\/td>\n<td>Volume of hydraulic oil moved through the circuit<\/td>\n<td>Must match the attachment&#8217;s required flow range for correct operating speed<\/td>\n<\/tr>\n<tr>\n<td>Ci\u015bnienie hydrauliczne<\/td>\n<td>Pressure available in the hydraulic circuit<\/td>\n<td>Must fall within the attachment&#8217;s rated pressure range to avoid damage or poor performance<\/td>\n<\/tr>\n<tr>\n<td>Auxiliary Flow<\/td>\n<td>Flow available at the auxiliary circuit<\/td>\n<td>Determines whether the machine can run powered attachments effectively<\/td>\n<\/tr>\n<tr>\n<td>Return Line \/ Back Pressure<\/td>\n<td>Pressure in the return path to the tank<\/td>\n<td>Some attachments are sensitive to back pressure and require a direct return line<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<div class=\"zl-blog-note\">\n<p><strong>Buyer Tip:<\/strong> Do not assume that a machine&#8217;s published maximum hydraulic flow and maximum pressure are always available at the same time. Actual hydraulic output depends on the circuit design, operating condition and attachment settings. Ask the supplier for the auxiliary hydraulic specifications that apply to the intended attachment.<\/p>\n<\/div>\n<p>Flow and pressure should never be treated as interchangeable. A machine with high pressure but limited flow may run some attachments poorly. A machine with high flow but insufficient pressure may not generate the force required for certain tools. Buyers should ask for both values and compare them against the requirements of the specific attachments they intend to use.<\/p>\n<div class=\"zl-blog-image\">\n    <img src=\"https:\/\/zhaolumach.com\/wp-content\/uploads\/2026\/09\/mini-excavator-hydraulic-flow-vs-pressure.webp\"\n         alt=\"Mini excavator hydraulic flow and pressure comparison for attachment compatibility\"\n         loading=\"lazy\"\n         decoding=\"async\">\n<\/div>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>4. What Are Auxiliary Hydraulics on a Mini Excavator?<\/h2>\n<p>Auxiliary hydraulics are additional hydraulic circuits on the excavator that supply oil to powered attachments. Without a properly configured auxiliary circuit, a machine cannot operate hydraulic breakers, augers, grapples, hydraulic thumbs or compactors.<\/p>\n<p>Common attachments that require auxiliary hydraulic flow include:<\/p>\n<ul>\n<li>Hydraulic breaker<\/li>\n<li>Auger drive<\/li>\n<li>Hydraulic grapple<\/li>\n<li>Hydraulic thumb<\/li>\n<li>Plate compactor<\/li>\n<\/ul>\n<p>Different attachments may require different hydraulic flow, pressure, control and return-line arrangements. Buyers should therefore confirm the attachment requirements before selecting the excavator&#8217;s auxiliary hydraulic configuration.<\/p>\n<p>For a broader overview of attachment types and mounting considerations, see the <a href=\"https:\/\/zhaolumach.com\/pl\/mini-excavator-attachments-guide\/\">Mini Excavator Attachments Guide<\/a>.<\/p>\n<div class=\"zl-blog-image\">\n    <img src=\"https:\/\/zhaolumach.com\/wp-content\/uploads\/2026\/09\/mini-excavator-auxiliary-hydraulic-couplers.webp\"\n         alt=\"Mini excavator auxiliary hydraulic couplers and hoses mounted on the boom\"\n         loading=\"lazy\"\n         decoding=\"async\">\n<\/div>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>5. One-Way vs Two-Way Auxiliary Hydraulic Flow<\/h2>\n<p>Auxiliary hydraulic circuits are commonly described as one-way or two-way flow, depending on how the oil is directed.<\/p>\n<p><strong>One-way flow<\/strong> typically supplies oil in one direction to operate a tool, with the return path managed separately. This configuration is often used for attachments that primarily require hydraulic power in a single direction, depending on the equipment design.<\/p>\n<p><strong>Two-way flow<\/strong> allows the operator to direct oil in both directions through the circuit. This is generally needed for attachments that must be powered in two directions, such as certain grapples or hydraulic thumbs that open and close.<\/p>\n<p>Buyers should not assume that every mini excavator supports both one-way and two-way auxiliary flow. The circuit type must be confirmed against the attachment requirements. A machine that only supports one-way flow may not operate a two-way attachment without modification or additional valving.<\/p>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>6. How Hydraulic Specifications Affect Attachment Compatibility<\/h2>\n<p>Attachment compatibility is not only about pin diameter, ear width or coupler type. Hydraulic specifications are equally important for powered attachments.<\/p>\n<p>When checking hydraulic compatibility, buyers should consider:<\/p>\n<ul>\n<li><strong>Hydraulic flow<\/strong> \u2014 Does the machine&#8217;s auxiliary flow fall within the attachment&#8217;s recommended range?<\/li>\n<li><strong>Operating pressure<\/strong> \u2014 Does the machine supply pressure within the attachment&#8217;s rated range?<\/li>\n<li><strong>Auxiliary circuit type<\/strong> \u2014 Is one-way or two-way flow required?<\/li>\n<li><strong>Coupler size and type<\/strong> \u2014 Do the hydraulic connections match the attachment hoses?<\/li>\n<li><strong>Return line<\/strong> \u2014 Is a dedicated return line required by the attachment?<\/li>\n<li><strong>Attachment weight<\/strong> \u2014 Is the attachment weight suitable for the carrier machine?<\/li>\n<li><strong>Mounting dimensions<\/strong> \u2014 Do the physical mounting points match the machine or quick coupler?<\/li>\n<\/ul>\n<div class=\"zl-blog-note\">\n<p><strong>Wa\u017cne:<\/strong> Physical mounting compatibility and hydraulic compatibility are separate checks. An attachment may fit the machine mechanically but still be unsuitable if the hydraulic flow, pressure or circuit configuration does not match. Buyers should confirm both before ordering.<\/p>\n<\/div>\n<p>The <a href=\"https:\/\/zhaolumach.com\/pl\/mini-excavator-attachments-guide\/\">Mini Excavator Attachments Guide<\/a> explains attachment selection in more detail, including buckets, breakers, augers and grapples.<\/p>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>7. What Should Buyers Check When Comparing Mini Excavators?<\/h2>\n<p>When reviewing specifications or comparing quotations, buyers should not focus only on maximum digging depth or engine power. The hydraulic system should be checked with the same level of attention.<\/p>\n<div class=\"zl-blog-checklist\">\n<ul>\n<li>Main hydraulic system configuration<\/li>\n<li>Auxiliary hydraulic availability<\/li>\n<li>Auxiliary flow<\/li>\n<li>Auxiliary pressure<\/li>\n<li>One-way or two-way auxiliary capability<\/li>\n<li>Hydraulic hose routing and protection<\/li>\n<li>Coupler specification<\/li>\n<li>Service access to filters and hoses<\/li>\n<li>Filtration quality<\/li>\n<li>Spare parts availability for hydraulic components<\/li>\n<li>Attachment requirements<\/li>\n<\/ul>\n<\/div>\n<p>This hydraulic checklist expands on the general machine parameters covered in the <a href=\"https:\/\/zhaolumach.com\/pl\/mini-excavator-specifications-guide\/\">Mini Excavator Specifications Guide<\/a>. That guide explains operating weight, dimensions, digging range, engine and other core specifications. Together, the two articles help buyers build a complete comparison before requesting a quotation.<\/p>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>8. Common Hydraulic Questions Buyers Should Ask a Supplier<\/h2>\n<p>A clear set of questions reduces the chance of receiving a quotation for a machine that cannot run the intended attachments. The following questions are useful when comparing suppliers or confirming a configuration.<\/p>\n<ul>\n<li>What is the auxiliary hydraulic flow?<\/li>\n<li>What is the auxiliary circuit pressure?<\/li>\n<li>Is the auxiliary circuit one-way, two-way or configurable?<\/li>\n<li>What coupler size and connection type are supplied?<\/li>\n<li>Is a dedicated return line available?<\/li>\n<li>Which attachments have been tested with this configuration?<\/li>\n<li>What hydraulic oil specification is recommended?<\/li>\n<li>What hydraulic filters and seals are included in spare-parts support?<\/li>\n<\/ul>\n<p>If a supplier cannot answer these questions clearly, that is an important signal during the evaluation process. Hydraulic configuration should be confirmed before ordering, not after delivery.<\/p>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>9. Basic Hydraulic Maintenance Buyers Should Understand<\/h2>\n<p>Hydraulic systems are reliable when kept clean and properly maintained. Buyers do not need to become hydraulic technicians, but understanding a few basic points helps prevent downtime and expensive repairs.<\/p>\n<ul>\n<li><strong>Hydraulic oil level<\/strong> \u2014 Check regularly and top up only with the recommended oil type.<\/li>\n<li><strong>Oil cleanliness<\/strong> \u2014 Contaminated hydraulic oil can accelerate pump, valve and seal wear. Use clean handling practices and follow the manufacturer&#8217;s oil requirements.<\/li>\n<li><strong>Filter replacement<\/strong> \u2014 Follow the manufacturer&#8217;s maintenance schedule for hydraulic filters.<\/li>\n<li><strong>Hose inspection<\/strong> \u2014 Check hoses regularly during pre-operation inspection for cuts, abrasion, bulges or leaks.<\/li>\n<li><strong>Fitting leaks<\/strong> \u2014 Small leaks can indicate worn seals or loose connections and should be addressed early.<\/li>\n<li><strong>Cylinder seals<\/strong> \u2014 Watch for oil leakage around cylinder rods. Damaged seals can lead to hydraulic oil loss and may require repair before the problem becomes more serious.<\/li>\n<li><strong>Abnormal heat<\/strong> \u2014 Excessively hot hydraulic oil may indicate a problem with cooling, flow restrictions or internal leakage.<\/li>\n<li><strong>Unusual noise<\/strong> \u2014 New or changing noises from the pump or valves should be investigated rather than ignored.<\/li>\n<\/ul>\n<p>Always follow the maintenance schedule provided by the manufacturer or supplier. Service intervals can vary by machine configuration and operating conditions.<\/p>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>10. Choosing a Mini Excavator for Hydraulic Attachments<\/h2>\n<p>The most practical approach is to define the job first, then the attachment, then the hydraulic requirements, and finally the machine configuration. Buying a machine first and assuming every attachment will work is a common and avoidable mistake.<\/p>\n<p>The recommended sequence is:<\/p>\n<div class=\"zl-blog-process\">\n<ul>\n<li>Identify the job<\/li>\n<li>Select the required attachment<\/li>\n<li>Confirm the attachment&#8217;s hydraulic flow and pressure requirements<\/li>\n<li>Check auxiliary circuit type and connections<\/li>\n<li>Shortlist machines that can support the attachment<\/li>\n<li>Confirm mounting and hydraulic compatibility before ordering<\/li>\n<\/ul>\n<\/div>\n<p>For buyers still selecting the base machine size, the <a href=\"https:\/\/zhaolumach.com\/pl\/mini-excavator-size-guide\/\">Przewodnik po rozmiarach minikoparek<\/a> can help narrow the options. If you are comparing different configurations, you can <a href=\"https:\/\/zhaolumach.com\/pl\/mini-excavator-supplier\/\">review the available mini excavator range<\/a> and discuss hydraulic requirements with the supplier before finalizing the specification.<\/p>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>What Hydraulic Information Should Be Included in an RFQ?<\/h2>\n<p>When requesting a quotation, providing clear hydraulic information helps the supplier recommend a suitable configuration and avoids misunderstandings later. Buyers do not need to know every value, but the following information is helpful when attachments are required.<\/p>\n<ul>\n<li>Excavator size \/ operating weight class<\/li>\n<li>Intended application<\/li>\n<li>Required attachments<\/li>\n<li>Required hydraulic flow if known<\/li>\n<li>Required pressure if known<\/li>\n<li>One-way or two-way requirement<\/li>\n<li>Coupler requirements<\/li>\n<li>Destination country<\/li>\n<li>Quantity<\/li>\n<\/ul>\n<p>If the buyer does not know the exact hydraulic values, describing the attachment type and its manufacturer&#8217;s requirements is often enough for the supplier to check compatibility.<\/p>\n<\/section>\n<section class=\"zl-blog-section\">\n<h2>Podsumowanie<\/h2>\n<p>A mini excavator hydraulic system is more than a supporting system. It determines whether the machine can dig effectively, travel smoothly, and run powered attachments reliably. Buyers who understand the basics of flow, pressure and auxiliary circuits are better equipped to compare machines and avoid ordering a configuration that does not match their work.<\/p>\n<p>Before finalizing a purchase, confirm the hydraulic specifications with the supplier and check them against the requirements of any attachments you plan to use. If you are still comparing machines or need help confirming a hydraulic configuration, contact ZHAOLU with your application details and attachment list.<\/p>\n<\/section>\n<div class=\"zl-blog-cta\">\n<h2>Need Help Matching Hydraulic Requirements to a Mini Excavator?<\/h2>\n<p>Tell us your intended application, required attachments and any known hydraulic requirements. Our team can help identify suitable configurations before quotation.<\/p>\n<p><a class=\"zl-blog-cta-button\" href=\"https:\/\/zhaolumach.com\/pl\/contact\/\">Skontaktuj si\u0119 z firm\u0105 ZHAOLU<\/a><\/p>\n<\/div>\n<div class=\"zl-blog-faq\">\n<h2>Frequently Asked Questions About Mini Excavator Hydraulic Systems<\/h2>\n<div class=\"zl-blog-faq-item\">\n<h3>What does a mini excavator hydraulic system do?<\/h3>\n<p>A mini excavator hydraulic system converts engine power into controlled hydraulic energy that operates the boom, arm, bucket, swing and travel functions. It also supplies oil to powered attachments through the auxiliary circuit.<\/p>\n<\/div>\n<div class=\"zl-blog-faq-item\">\n<h3>What is the difference between hydraulic flow and pressure?<\/h3>\n<p>Hydraulic flow is the volume of oil moving through the circuit, typically in L\/min or GPM. Hydraulic pressure is the pressure available in the circuit, typically in bar, MPa or PSI. Flow mainly affects operating speed, while pressure relates to the working force. Both must match the attachment requirements.<\/p>\n<\/div>\n<div class=\"zl-blog-faq-item\">\n<h3>What are auxiliary hydraulics used for on a mini excavator?<\/h3>\n<p>Auxiliary hydraulics provide a dedicated circuit for powered attachments such as hydraulic breakers, augers, grapples and hydraulic thumbs. Without auxiliary hydraulics, these attachments cannot be operated.<\/p>\n<\/div>\n<div class=\"zl-blog-faq-item\">\n<h3>Do all mini excavators support hydraulic breakers and augers?<\/h3>\n<p>No. Not all mini excavators include a suitable auxiliary hydraulic circuit. Buyers should confirm the auxiliary flow, pressure, circuit type and coupler configuration before assuming a breaker or auger can be operated.<\/p>\n<\/div>\n<div class=\"zl-blog-faq-item\">\n<h3>What hydraulic information should I check before buying an attachment?<\/h3>\n<p>Check the attachment&#8217;s required hydraulic flow, operating pressure, one-way or two-way flow, coupler size, hose connections and return-line requirements. Compare these against the machine&#8217;s auxiliary circuit specification.<\/p>\n<\/div>\n<\/div>\n<div class=\"zl-blog-related\">\n<h2>Materia\u0142y dotycz\u0105ce minikoparek<\/h2>\n<ul>\n<li><a href=\"https:\/\/zhaolumach.com\/pl\/mini-excavator-specifications-guide\/\">Mini Excavator Specifications Guide<\/a><\/li>\n<li><a href=\"https:\/\/zhaolumach.com\/pl\/mini-excavator-attachments-guide\/\">Mini Excavator Attachments Guide<\/a><\/li>\n<li><a href=\"https:\/\/zhaolumach.com\/pl\/mini-excavator-size-guide\/\">Przewodnik po rozmiarach minikoparek<\/a><\/li>\n<li><a href=\"https:\/\/zhaolumach.com\/pl\/mini-excavator-supplier\/\">Dostawca minikoparek<\/a><\/li>\n<li><a href=\"https:\/\/zhaolumach.com\/pl\/contact\/\">Skontaktuj si\u0119 z firm\u0105 ZHAOLU<\/a><\/li>\n<\/ul>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"<p>A practical guide to mini excavator hydraulic systems, covering hydraulic flow, pressure, auxiliary circuits, attachment compatibility, maintenance and buyer checks before purchasing.<\/p>","protected":false},"author":10,"featured_media":8866,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[23],"tags":[111,112,115,103],"class_list":["post-8864","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-blog","tag-attachments","tag-equipment-guide","tag-hydraulic-system","tag-mini-excavator"],"acf":[],"_links":{"self":[{"href":"https:\/\/zhaolumach.com\/pl\/wp-json\/wp\/v2\/posts\/8864","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/zhaolumach.com\/pl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/zhaolumach.com\/pl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/zhaolumach.com\/pl\/wp-json\/wp\/v2\/users\/10"}],"replies":[{"embeddable":true,"href":"https:\/\/zhaolumach.com\/pl\/wp-json\/wp\/v2\/comments?post=8864"}],"version-history":[{"count":0,"href":"https:\/\/zhaolumach.com\/pl\/wp-json\/wp\/v2\/posts\/8864\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/zhaolumach.com\/pl\/wp-json\/wp\/v2\/media\/8866"}],"wp:attachment":[{"href":"https:\/\/zhaolumach.com\/pl\/wp-json\/wp\/v2\/media?parent=8864"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/zhaolumach.com\/pl\/wp-json\/wp\/v2\/categories?post=8864"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/zhaolumach.com\/pl\/wp-json\/wp\/v2\/tags?post=8864"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}